Wide Arch Single Sphere Flexible Rubber Expansion Joint
Description
GJQ (X) -DF-II type single sphere flexible rubber joint is a kind of single sphere end face full sealing flexible rubber joint. " DF " in the " GJQ (X) -DF " shows a single sphere, and "II" refers to the end of the whole seal. A small edge along the card slot type is on the opposite（side）of the end face of the full sealed rubber joint. The edge of the rubber joint is relatively wide, which has been extended to the outer edge of the flange.Above the outer edge of the rubber joint ,there are bolt holes corresponding to flange.
GJQ (x) -DF-II type single sphere flexible rubber joint has same inner layer and outer layer rubber material with GJQ (x) -DF-I type flexible rubber joint,which can choose any kind of rubber material ,such as IIR, CR, EPDM, NR, NBR and so on. The external and internal layers of rubber material can be different.
Product Alias:Flexible Rubber Joint,Rubber Joint,Rubber Soft Connection,Shock Absorber,Flange Soft Connection,Flexible Rubber Joint,Rubber Pipe Joint,Compensator,etc
Product Specifications: DN25mm - DN3600mm
Product Pressure: 0.6-2.5 MPa
Level of Shock Absorption: A level, shock absorption is very high
Product Certification: ISO9001:2008
Scope of Application: acid, alkali, corrosion, oil, hot and cold water, compressed air, compressed natural gas, etc
Product Color: black, physical color see goods display pictures
Working Temperature: 15-115 ℃ (ordinary) / - 30-250 ℃ (special)
spectifications
Specification
| DN Diameter |
FF Length (mm) |
Axis displacement |
Radial displacement |
Deflection displacement |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Type-I | Type-II | Type-I | Type-II | Type-I | Type-II | |||||
| mm | inch | Extension | Compression | Extension | Compression | |||||
| 32 | 1¼″ | 90 | 6 | 10 | 9 | ±7.5° | ||||
| 40 | 1½″ | 95 | 7 | 10 | 9 | ±7.5° | ||||
| 50 | 2″ | 105 | 7 | 10 | 10 | ±7.5° | ||||
| 65 | 2½″ | 115 | 7 | 13 | 11 | ±7.5° | ||||
| 80 | 3″ | 135 | 8 | 15 | 12 | ±7.5° | ||||
| 100 | 4″ | 150 | 10 | 19 | 13 | ±7.5° | ||||
| 125 | 5″ | 165 | 12 | 19 | 13 | ±7.5° | ||||
| 150 | 6″ | 180 | 12 | 20 | 14 | ±7.5° | ||||
| 200 | 8″ | 210 | 16 | 25 | 30 | 35 | 22 | 25 | ±7.5° | ±10° |
| 250 | 10″ | 230 | 16 | 25 | 30 | 40 | 22 | 25 | ±7.5° | ±12° |
| 300 | 12″ | 245 | 16 | 25 | 35 | 45 | 22 | 30 | ±7.5° | ±12° |
| 350 | 14″ | 255 | 16 | 25 | 35 | 45 | 22 | 30 | ±7.5° | ±12° |
| 400 | 16″ | 255 | 16 | 25 | 35 | 45 | 22 | 30 | ±7.5° | ±12° |
| 450 | 18″ | 255 | 16 | 25 | 36 | 47 | 22 | 30 | ±7.5° | ±12° |
| 500 | 20″ | 255 | 16 | 25 | 36 | 48 | 22 | 30 | ±7.5° | ±12° |
| 600 | 24″ | 260 | 16 | 25 | 40 | 50 | 22 | 33 | ±7.5° | ±12° |
| 700 | 28″ | 260 | 16 | 25 | 40 | 55 | 22 | 33 | ±7.5° | ±12° |
| 750 | 30″ | 260 | 40 | 55 | 33 | ±12° | ||||
| 800 | 32″ | 260 | 16 | 25 | 45 | 55 | 22 | 35 | ±7.5° | ±12° |
| 900 | 36″ | 260 | 16 | 25 | 45 | 55 | 22 | 35 | ±7.5° | ±12° |
| 1000 | 40″ | 260 | 16 | 25 | 45 | 60 | 22 | 35 | ±7.5° | ±12° |
| 1100 | 44″ | 300 | 45 | 60 | 35 | ±7.5° | ±12° | |||
| 1200 | 48″ | 300 | 16 | 25 | 50 | 60 | 38 | ±7.5° | ±10° | |
| 1300 | 52″ | 300 | 50 | 70 | 38 | ±10° | ||||
| 1400 | 56″ | 350 | 60 | 70 | 40 | ±10° | ||||
| 1500 | 60″ | 350 | 60 | 70 | 40 | ±10° | ||||
| 1600 | 64″ | 350 | 18 | 25 | 60 | 70 | 24 | 46 | ±7.5° | ±10° |
| 1800 | 72″ | 400 | 18 | 25 | 60 | 75 | 24 | 48 | ±7.5° | ±10° |
| 2000 | 80″ | 450 | 70 | 75 | 50 | ±10° | ||||
| 2200 | 88″ | 400 | 70 | 75 | 50 | ±10° | ||||
| 2200 | 88″ | 500 | 70 | 80 | 60 | ±10° | ||||
| 2400 | 96″ | 500 | 80 | 80 | 60 | ±10° | ||||
| 2600 | 104″ | 500 | 85 | 80 | 60 | ±10° | ||||
| 2800 | 112″ | 550 | 85 | 80 | 60 | ±10° | ||||
| 3000 | 120″ | 550 | 85 | 80 | 60 | ±10° | ||||
Product Detail
Application
Workshop
Service
Faq
1. Is the flange galvanized?
Yes, carbon steel flange not painting anticorrosive paint must be galvanized in order to avoid rusting. Usually, we choose electronic galvanized and hot dip galvanized, and most of our customers will choose hot galvanizing.
2. What kind of standard of your drilled flange?
Besides Chinese national standard, we also support American standard, German standard, British standard, Japanese standard, European standard and Australia standard. If you can give us the center distance of the hole, the number and diameter, we can also produce customized flange.
3. Does your company have spool type?
Yes, considering that the pipe length will be longer or shorter than the expection after finishing the installation of the pipes and the cost of producing new mold is expensive, we can produce spool type according to your requirements
4. Can the inner layer rubber and outside layer rubber be made using different rubber?
Yes, we can produce the rubber joint according to the environment the rubber joint is used in, and we will choose different rubber for the inner layer and outside layer.
5. Can I only buy ball without the flange?
Yes, and the price will be cheaper. For small diameter rubber joint, we have goods in stock and we can offer you a free hydrotest, but for large diameter rubber joint you need order.
6. How long is your product’s warranty?
12 month. From the day the customer receiving the goods, we grant a free replacement if the products have any problems during the guarantee period.
7. Can you offer the rubber joint sample?
For standard type of rubber joint we can offer the sample, but the customer will afford the freight. For non-standard rubber joint or more quantity, we will charge for the sample.
8. Does the rubber joint have inspection report?
Yes, all of our product will be conducted hydrotest and leave the factory with a qualified inspection report.
9. Can you offer the drawing?
Yes, we have a excellent engineer team, and they will offer your professional drawing and technical support.
Customer
Packing & Shipping
